Red Master II & III

Red Master II & III


Red Master II

RedMaster2-3.jpg
The Red Master II and Red Master III can be used in synthetic, fiber, wood and dirt arenas. Float plan can be removed and replaced with the optional paddle wheel for the different types of footing. The Red Master II & III give added tooth to ground coverage with better spacing for material to pass through. The S-Tines help to add air and “cush” back to the footing.

Features of the Red Master II and Red Master III:

  • 4 X 3/16-inch wall thickness structural tubing
  • Double-braced lift brackets
  • Three-point hitch allows operator to back into corners
  • Tips are reversible (teeth) for extended life
  • Two rows of s-tines
  • Adequate ground clearance when lifted for transport
  • Eliminates crusting, breaks up clods ad smoothes
  • Guage wheels and tires control consistency and depth
  • Three tire height adjustments; manufacture settings is in the center hole adjustment
  • Red Master II adjusts zero to 5 inches of depth
  • Both rows of spring teeth adjust depth with one tumbuckle, while the 3-point will supply additional depth control
  • Required HP: 24-26 for 6-ft.; 26-30 HP for 8-ft.: and 38-40 HP for 10-ft. Model
  • Adjustable float pan is 3/16-inch steel gauge with ¼-inch teardrop sides
  • Float pan can be removed and exchanged for a paddle wheel option
  • A tow hitch provides towing capability for the Red Roller


Width

HP

6ft

24 hp

8ft

26 hp

10ft

38 hp



Red Master III

Additional features of the Red Master III:

  • Longer frame length to accommodate three rows of s-tines, which allows a higher volume of material to be moved for maximum cush and greater harrowing depth
  • Adjustable tooth depth, zero to 5 inches
  • The three rows of tines adjust with one turnbuckle while the 3-point supplies additional depth control


Width

HP

6ft

26 hp

8ft

30 hp

10ft

40 hp